We offer the following high frequency cores and transformers made with amorphous alloys:
- O.D.: 3 – 150 mm
- Height: up to 40 mm
- Low specific losses, small coercive force and residual induction at high frequencies (20 – 400 kHz)
- Increase efficiency of devices operating at high frequencies, provide considerable mass and device dimensions, reduce overheating and increase transformer efficiency
- Cores can be custom-made according to customer’s specifications
- MH cores, wound from amorphous alloys on Co-base, with rectangular hysteresis have high squareness, low losses and low coercive force at high frequencies.
- Applications include magnetic amplifiers for power supplies with switching mode, pulse transformers, current transformers, transformers for self-exciting inverter and other saturation devices.
- Toroidal Cores of the type MA from Amorphous Alloy with DC Bias
- Capped core of the type MA, wound from Fe-base amorphous alloy, are effective and reliable at high frequencies in tens and hundreds kHz. Main features include high saturation induction, Bs = 1.5 T, very low core losses at high frequencies and high level of DC bias at high permeability.
- Applications include output chokes with DC bias, chokes of power ratio correction, chokes of power supply filters with high frequency switching mode and inverters circuits.
- Cores can be custom-made according to customer’s specifications
- MN cores, strip-wound, from Co-base amorphous alloy with rectangular hysteresis, have unique properties: low losses, low coercive force and high squareness ratio at frequency of 100 kHz and higher in comparison with cores from permalloys on the base of Fe-Ni.
- MN cores allow increased efficiency of modern devices, operating at high frequencies, and provide miniaturization of electronic and electric equipment and enable excellent high frequency characteristics.
- Applications include modern devices for noise suppression at frequencies for tens and hundreds kHz.
- Cores can be custom-made according to customer’s specifications
- Co-base cores with linear hysteresis loop with high value of inductance ratio at 10kHz, enough linearity in the field up to 4 A/m & 16 A/m and low specific losses.
- Applications include ISDN/DSL/Broadband transformers.
- Cores can be custom-made according to customer’s specifications
For questions and comments about this website please contact webmaster@nettlelynx.com
copyright Nettle Lynx Corp. 2003.
Last changed: August 16, 2006